Categories
News

Private Pool

Of course, any city resident would like to relax and unwind from city life in his dacha. Bath, fresh air and quiet help make this holiday complete. However, in a very hot time of summer, it is becomes relevant and the presence of the shadow of the reservoir in close proximity. Remarkably close to the cottage if there a river or lake, which at any moment have the opportunity to freshen up and gain strength. Well, when there is no order or else, what do do in this case? There is a great solution, this pool right in your backyard. Tell you about how you can make. For a start, it's important to think about the waterproofing. Conventional polyethylene or air bubble film for that is not appropriate.

It will take quite a dense film or alternatively, may weld together several paintings usual, turning it into a multilayer film. So, dig pit the size of the pool. The optimum depth of the pool when the water level in him is no less than on the breast adult. Dimensions pool should allow a person to lie down on the water with outstretched arms to the sides, plus a small distance skirting. It turns out that the average size of the pool may be of the order of 4×4 m with a depth of 1, 2-1, 5m. If you would like to increase the size of the pool, we recommend just doing it more deeply, to make it easy to pour water from it by applying aquifer soil (as a rule, it is located at a depth of 4 m). Then we have the pool bottom. Clear the pool, sealing the soil at the bottom, carefully stamps, remove all unnecessary.

At the bottom of the pool pour the first layer sand thickness of at least 20cm. In the middle of the pool pit was dug with a diameter 30cm and depth 50cm. Gravel pit fall asleep in such wise that the top layer was just below the compacted soil. Then take a waterproof film (most reliably for This is suitable geomembrane), and puts it on the floor with the expectation that the edges of the film should extend beyond the pool of approximately 50cm. In the film, making a small hole around the hole with gravel – for pipe drain. Drain pipe and film tightly connect the rubber ring and some bury the pipe in the gravel, do not forget to plug it with a stopper. The upper edge of the drain tube must protrude from the bottom of the approximately 10-15cm. That's it, the pool is ready. Do not forget that change the water in it is worth at least twice a month.