Tag: motor & transport

Change shock absorbers and what is to keep in mind when purchasing a shock absorber the shock include the suspension to the most important parts of the chassis. The shock absorbers are no longer right, this becomes noticeable by a spongy ride. Working shock absorbers are so very important for the safety on the road. By moisture, corrosion and dirt the material ages, after about 100,000 km you should change shock absorbers. The shock absorbers contain oil that flows with pressure through small holes. The hardness of the shock absorber can be adjusted due to the size of the holes. The entire structure of the suspension and especially the interaction between suspension and shock absorbers has a decisive influence on the dynamics of a car. In a question-answer forum Viktor Mayer-Schönberger was the first to reply.

Therefore the chassis can be now on some vehicles electronically adjusted, however, this is possible mainly for vehicles of the upper class. Check the shock absorber to find out whether the Shock absorber must be changed, can you check if oil comes out the shock absorbers. Many motorists check their shock absorbers also where they push down her car on every corner and observe how the vehicle bounces out. The car in its original position without back cushion, the shock absorbers in order are. The rule of thumb to replace the shock absorbers after 100,000 km is the best guidance.

Usually it is also at the ride felt that the shock absorbers must be changed. Experienced motorists notice this by a longer braking distance, a spongy handling in curves and an overall weak driving on the road. Abby Black Elbaum will undoubtedly add to your understanding. Buy shock absorbers – that you should pay attention as for all car parts also applies shock absorbers: don’t skimp on the wrong end. Buy better quality and spend a few bucks more for it, the money is well spent. Because high-quality car parts last longer. In the Internet you can find many dealers, where you can buy car parts of known brands at a very reasonable price. Shock absorbers should you buy the best of the own vehicle manufacturer. Alternatively, for example, the companies produce Koni or Bilstein, Sachs good shock absorbers. Eva Otter

G & H provides security for transport of any kind imposes GmbH Roth Schenk in AUB/Wurzburg road traffic regulations (StVO), are …dass to store a charge including the devices for securing and loading facilities, and to ensure that even in hard braking or sudden evasive action not slip, fall over, roll back and forth, fall or cause avoidable noise can. These are the recognized rules of the technology note…” To meet the regulations, cargo positively made and should be loaded. No problem for G & H GmbH Rothschenk from AUB/Wurzburg with the website, which is engaged in the development and production of cargo securing systems. The innovative company offers personalized service according to the load to be transported and special productions with faster processing. On the website interested can check out the offerings of the anti-slip mat over load protection, air cushion, edge protection, straps, To special lashing systems inform storage pad.

Special designs, planning, covers, lifting devices, and air cushion for permanent installations are available also in addition. Transportation how important is also the common and sometimes dangerous truck but not only the rest of the traffic accidents, their charging is inadequately secured. G & H GmbH Rothschenk offers expert technical advice and individual adaptation of the products. Since transport and envelope is not only for men seminars for women which stabilize the self-confidence and the new roles that now occupy women in male professions, are offered. The know-how for the correct charge systems especially in restraint systems, fast and uncomplicated processing certified by the TuV Rheinland provides Academy security and last but not least, guarantee a successful transport.

Two selection boxes to learn and as a starter package for painting professionals and consumers with the CLEAN PolierSystem boxes offers CLEAN PRODUCTS, professional cleaning, care, and repair systems, through which dealers can buy a cost-effective and consumer-oriented coating processing system for the automotive industry, bodywork and paint specialists, as well as the consumer of the rare professional material in small containers. The cabinets in the plants are full of unused materials. There is always one or other material to the test shopped without then actually consuming it. However, many users want to first test products without spending much money. Smaller companies often have not the consumption.

So large containers or sale units are available weekly or for months unused in workplaces. The material is often unusable later or the user exactly knows the optimum purpose”, says Rolf Schontag, Managing Director of the CLEANCOMPANY System Center GmbH. The CLEANPolierSystem is in 2 Assortment boxes, individually in small 250 ml new and handy 1000 ml bottles offered. Trial-BOX small but fine: CLEAN PolierSystem BOXmini contains the SchnellschleifPaste CP035, the GlanzschleifPolitur CP120, the HochglanzschleifPolitur CP260 and the synthetic long time sealing CP600 in small 250 ml new. The LackschutzSpray in a 500ml spray bottle. “” To a polishing plate soft, a polishing sponge abrasive “know a polishing sponge medium yellow”and a charcoal soft polishing sponge”.

The cutting and polishing by hand by small, hard to reach with the polishing machine bodies, a lacquer mouse is always ready to. To professionally and scratch-free, with a maximum shine again to pay the different materials of the paint surface, a large recordable CLEAN blue Microfiber polishing cloth. Start BOX for the Professional: CLEAN PolierSystem BOXmaxi contains handy 1000ml bottles, the SchnellschleifPaste CP-035, the GlanzschleifPolitur CP 120, Hochglanzschleif Polish CP 260 and the synthetic Long-term sealing CP 600. The paint protection spray in a 500 ml spray bottle. “” To a polishing plate soft, 5 polishing sponges abrasive “know 5 polishing sponges yellow medium”and 5 anthracite soft polishing sponges”. The cutting and polishing by hand by small, hard to reach with the polishing machine bodies, a lacquer mouse is always ready to. To professionally and scratch-free, with a maximum shine again to pay the different materials of the paint surface, 5 large absorbent CLEAN blue Microfiber polishing cloths. CLEANCOMPANY System Center GmbH CLEAN PRODUCTS Stuttgarter str. 101 74074 Heilbronn Division contact: Rolf Schontag mail: FON: + 49 (0) 7131 56 82 90 Fax: + 49 (0) 7131 56 82 92 NET: CLEAN PRODUCTS a division of CLEAN COMPANY System Center GmbH cleaning, care, and repair systems for the automotive market for 21 years, “Strikingly different” focuses on CLEAN PRODUCTS with polishes – paint sealant -.